Product Description
120 VAC 50/60 Hz, 15 Min Flame Establishing Period, Intermittent Pilot, Integrated, Manual Start, Primary, Microprocessor Burner Control Functions Include Flame Supervision, System Status Indication, System or Self-Diagnostics and Trouble Shooting
• Adaptable to Continuous Firing, High-Low or Modulating Firing Rate for semi-Automatic Burner Sequencing
• Operates with the Following: Torch-Ignited Main Burner or Torch-Ignited Pilot Using S445A Start-Stop Station or Conventional Knee or Foot Operated Station
• Direct-Ignition Oil Burner or Electrically Ignited Pilot, Using S445A Start-Stop Station
• Five LEDs Provide Sequence Information
• Nonvolatile Memory
• Flame Signal Check During Standby
• Shutter Drive Output
• Compatible with Existing Honeywell Flame Detectors
• Terminal Provided for External Alarm to Sound on Flame Failure"" • Microprocessor Burner Control
• Type Integrated, Manual Start, Primary
• Flame Establishing Period 15 Minute
• Pilot Type Intermittent
• Voltage Rating 120 Volt AC 50/60 Hertz
• Operating Temperature -40 to 140 Deg F
• Size 5 Inch Width x 5-1/4 Inch Depth x 5 Inch Height
• Application Industrial Gas, Oil or Combination Fuel Single Burner
• Approval UL, CSA, FM, FCC, RE
• Vibration 0.5G
