Product Description
2 or 3 Sec Flame Failure Response Time, Purple, Ultraviolet, Ampli-Check, Flame Signal Amplifier Solid State Plug-In Amplifiers that Respond to Flame Detector Inputs to Indicate the Presence of Flame When Used with 7800 Series Relay Module
• Flame Signal Strength Ranges from 0 to 5 Volt DC
• Flame Signal Test Jacks to Measure Amplifiers Flame Signal Voltage
• Plug into 7800 Relay Module through Printed Circuit Board Edge Connector Keyed for Proper Orientation
• Color Coded Labels Identify Flame Detection Type
• Dynamic Self-Check Amplifiers Test the Detectors and All Electronic Components in the Flame Detection System
• 7800 Series Relay Module Locks Out on Safety Shutdown with Flame Detection System Failure
• Compatible with Existing Honeywell Flame Detector"" • Flame Signal Amplifier
• Type Ultraviolet, Ampli-Check
• Approval UL, CSA
• Flame Failure Response Time 2 Second or 3 Second
• Color Purple
• Used On 7800 Series Relay Module, C7027A/C7035A/C7044 Minipeeper Ultraviolet Flame Detector (Gas/Oil) • Flame Failure Response Time 2 Second or 3 Second
• Color Purple
• Used On 7800 Series Relay Module, C7027A/C7035A/C7044 Minipeeper Ultraviolet Flame Detector (Gas/Oil) • Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
