Product Description
2 or 3 Sec Flame Failure Response Time, Green, Rectification, Ampli-Check, Flame Signal Amplifier Solid State Plug-In Amplifiers that Respond to Flame Detector Inputs to Indicate the Presence of Flame When Used with 7800 Series Relay Module
• Flame Signal Strength Ranges from 0 to 5 Volt DC
• Flame Signal Test Jacks to Measure Amplifiers Flame Signal Voltage
• Plug into 7800 Relay Module through Printed Circuit Board Edge Connector Keyed for Proper Orientation
• Color Coded Labels Identify Flame Detection Type
• Dynamic Self-Check Amplifiers Test the Detectors and All Electronic Components in the Flame Detection System
• 7800 Series Relay Module Locks Out on Safety Shutdown with Flame Detection System Failure
• Compatible with Existing Honeywell Flame Detector"" • Flame Signal Amplifier
• Type Rectification, Ampli-Check
• Approval UL, CSA
• Flame Failure Response Time 2 Second or 3 Second
• Color Green
• Used On 7800 Series Relay Module, C7004/C7005/C7007/C7008/C7009 Rectifying Flame Rod, Q179 Flame Rectifier Gas Pilot (Gas), C7012A/C7012C Solid State Purple Peeper Ultraviolet Flame Detector (Gas/Oil/Coal) • Flame Failure Response Time 2 Second or 3 Second
• Color Green
• Used On 7800 Series Relay Module, C7004/C7005/C7007/C7008/C7009 Rectifying Flame Rod, Q179 Flame Rectifier Gas Pilot (Gas), C7012A/C7012C Solid State Purple Peeper Ultraviolet Flame Detector (Gas/Oil/Coal) • Solid state plug-in amplifiers that respond to flame detector inputs to indicate the presence of flame when used with 7800 SERIES relay modules.
