Product Description
120/240 VAC, 58.8 A, 20 to 300 PSI, Screw Terminal, SPST, Diaphragm, Manual Reset, Break On Pressure Rise, High Pressure Limit Switch Stainless Steel Diaphragm for Use with Steam, Air, Noncombustible Gases and Fluids Non-Corrosive to Stainless Steel
• Micro Switch Snap-Acting Switches Open Automatically on Pressure Rise
• Must be Manually Reset
• Mount Using 1/4 Inch Female Threaded Fitting on Diaphragm Assembly or Surface Mount Through Back of Case"" • High Pressure Limit Switch
• Type Manual Reset, Break On Pressure Rise
• Operator Type Stainless Steel Diaphragm
• Operating Pressure Rating 20 to 300 PSI
• Maximum Line Pressure Rating 350 PSI
• Pressure Media Steam, Air, Non-Combustible Gas, Non-Corrosive Fluid
• Contact Configuration SPST
• Contact Rating 9.8 Amp at 120 Volt AC/4.9 Amp at 240 Volt AC (Full Load), 58.8 Amp at 120 Volt AC/29.4 Amp at 240 Volt AC (Locked Rotor)
• Connection Type 1/2 Inch Conduit, Screw Terminal
• Approval UL
• Overall Dimension 4-1/2 Inch Width x 3-1/2 Inch Depth x 5 Inch Height
• Pipe Connection 1/4 Inch Internal Threaded • Overall Dimension 4-1/2 Inch Width x 3-1/2 Inch Depth x 5 Inch Height
• Pipe Connection 1/4 Inch Internal Threaded
