Product Description
120/240 VAC, 58.8 A, 2 to 25 PSI, Screw Terminal, SPST, Diaphragm, Manual Reset, Break On Pressure Rise, High Pressure Limit Switch Stainless Steel Diaphragm for Use with Steam, Air, Noncombustible Gases and Fluids Non-Corrosive to Stainless Steel
• Micro Switch Snap-Acting Switches Open Automatically on Pressure Rise
• Must be Manually Reset
• Mount Using 1/4 Inch Female Threaded Fitting on Diaphragm Assembly or Surface Mount Through Back of Case"" • High Pressure Limit Switch
• Type Manual Reset, Break On Pressure Rise
• Operator Type Stainless Steel Diaphragm
• Operating Pressure Rating 2 to 25 PSI
• Maximum Line Pressure Rating 25 PSI
• Pressure Media Steam, Air, Non-Combustible Gas, Non-Corrosive Fluid
• Contact Configuration SPST
• Contact Rating 9.8 Amp at 120 Volt AC/4.9 Amp at 240 Volt AC (Full Load), 58.8 Amp at 120 Volt AC/29.4 Amp at 240 Volt AC (Locked Rotor)
• Connection Type 1/2 Inch Conduit, Screw Terminal
• Approval UL
• Overall Dimension 4-1/2 Inch Width x 3-1/2 Inch Depth x 5 Inch Height
• Pipe Connection 1/4 Inch Internal Threaded • Overall Dimension 4-1/2 Inch Width x 3-1/2 Inch Depth x 5 Inch Height
• Pipe Connection 1/4 Inch Internal Threaded
