Product Description
120 VAC 50/60 Hz, 25 VA, Microprocessor Based, Burner Management Flame Safeguard Control without Display A Non-Volatile Memory to Remember Its History and Present Position Even When Power is Interrupted
• a Constant Flame Signal Read-Out Via Display Module
• Read-Out of Main Fuel Operational Hours and Complete Cycles Via Display Module
• Modbus Communications Via Rs485 Multi-Drop Link
• Dipswitches Located on the EP Programmer to Allow Selectable Purge Time
• a Run/Check Switch Which Allows the Operator to Stop the Program Sequence"" • Burner Management Flame Safeguard Control
• Item Burner Management Flame Safeguard Control
• Type Microprocessor Based
• Voltage Rating 120 Volt AC 50/60 Hertz
• Power Consumption 25 Volt Amp
• Temperature Rating -40 to 140 Deg F
• Humidity Rating 85 Percent RH (Non-Condensing)
• Approval UL (Canada and US), FM
• Includes EB700 Chassis, EC600 Dust Cover, 48-1836 Mounting Screw
• Excludes Display • Type Microprocessor Based
• Voltage Rating 120 Volt AC 50/60 Hertz
• Power Consumption 25 Volt Amp
• Temperature Rating -40 to 140 Deg F
• Humidity Rating 85 Percent RH (Non-Condensing)
• Approval UL (Canada and US), FM
• Includes EB700 Chassis, EC600 Dust Cover, 48-1836 Mounting Screw
• Excludes Display • The Fireye® E110 FLAME-MONITOR™ System is a microprocessor based burner management control system designed to provide the proper burner sequencing, ignition and flame monitoring protection on automatically ignited oil, gas, and combination fuel burners. In conjunction with limit and operating controls, it programs the burner/blower motor, ignition and fuel valves to provide for proper and safe burner operation. The control also provides current operating status and lockout information in the event of a safety shutdown. The manner in which this information is displayed is dependent on the type of programmer (EP or EPD) and display module (ED510 or ED500).
