Product Description
2 WAY 1/2" SW VALVE BODYOverview
Two-way Cartridge Cage Valves are intended for hydronic applications in a normal indoor environment to control flow of hot/chilled water glycol solution up to 60% concentration. These valves are designed for zone control of heating/cooling systems.
Features
- Quick open, linear, and equal percentage flow characteristics available
- Bi-directional installation
- 3000-series valves for floating and modulating non-fail safe applications
- 1000-series valves for two-position control
- High close-off rating independent of Cv
- Available with a variety of North American and international pipe fittings
- No tools required for actuator installation or removal
- Actuator removal does not require draining system
- Service is by replacement of cartridge, not valve body
- Cartridge replacement rebuilds valve to factory-new condition.
Product Specifications | |
| Maximum Safe Operating Pressure (psi) | 300 psi |
| Maximum Safe Operating Pressure (kPa) | 2068 kappa (20 Bar) |
| Includes | Cartridge installation wrench |
| Used With | VC actuators, Floating or Modulating |
| Comments | characterized cartridge for use with floating and modulating actuators |
| Approvals, Canadian Standards Association | CSA Certified |
| Timing | When used with VC series Actuator--2 minutes |
| Ambient Temperature Range (F) | 32 F to 150 F |
| Ambient Temperature Range (C) | 0 C to 65 C |
| Connection Type | Sweat |
| Body Pattern | Two-way, Straight-through |
| Pipe Size (inch) | 1/2 in. |
| Pipe Size (DN) | DN15 |
| Fluid Temperature (C) | 1 C to 95 C |
| Fluid Temperature (F) | 34 F to 203 F |
| Maximum Differential Pressure Ratings (Close-off) (psi) | 60 psi |
| Maximum Differential Pressure Ratings (Close-off) (kPa) | 414 kPa (4 bar) |
| Capacity (Cv) | 1.3 Cv |
| Capacity (Kv) | 1.1 kvs |
| Valve Action | Stem up to close A port |
| Valve Type | Cartridge Cage Valve |
| Controlled Fluid | Chilled or hot water with up to 60% Glycol |
| Materials (Body) | Bronze |
| Materials (Seat) | EPDM O-ring seals on Noryl piston |
| Materials (Stem) | Stainless Steel |
| Materials (Cartridge) | Ryton™, Noryl™ engineering plastic |
| Flow Characteristic | Equal Percentage |
| Actuation | Proportional, purchase separately |
| Stem Travel (in.) | 0.4 in. |
| Stem Travel (mm) | 10 mm |
| Materials (Packing) | EPDM rubber |
Product Videos
Custom Field
MPN VCZAA1600
