Honeywell VR8204A2076 Dual Valve Intermittent Pilot Gas Valve 1/2" X 1/2"

(No reviews yet) Write a Review
Honeywell VR8204A2076 Dual Valve Intermittent Pilot Gas Valve 1/2" X 1/2"
Honeywell VR8204A2076 Dual Valve Intermittent Pilot Combination Gas Valve


Combination gas controls for use in 24 Vac, gas-fired, intermittent pilot appliances with capacities from 20 to 200 cfh.


  • Controls include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
  • Use with S86F,H; S8600F,H and S8610 Control Modules.
  • Compact size.
  • Provide two automatic valves.
  • Solenoid operated first automatic valve opens on thermostat call for heat; closes when call for heat ends.
  • Diaphragm operated second automatic valve opens under control of regulator; closes if gas or power supply is interrupted.
  • Meet codes requiring dual safety shutoff.
  • Natural to LP and LP to Natural conversion kits available for standard and slow opening gas valves.
  • All adjustments and wiring connections are accessible from top of control.
  • ON-OFF lighting sequence.

Product Specifications

Single Stage
Dimensions (in.)
4 5/8 in. high x 4 1/8 in. wide x 2 11/16 in. deep
Dimensions (mm)
117 mm high x 104 mm wide x 69 mm deep
Natural to LP Conversion Kit; One 1/2" x 3/8" reducer bushing; One 3/4" straight flange
0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically.
60 Hz
Approvals, Underwriters Laboratories Inc.
UL Component Recognized: MH5323
Tradeline Value
Electrical Connections
1/4 in. quick-connect male terminals
24 Vac
Operating Temperature Range (F)
0 F to 175 F
Operating Temperature Range (C)
-18 C to +79 C
Approvals, Canadian Gas Association
CGA Design Certificate: L2025006
Body Pattern
Opening Characteristics
Standard Opening
Pressure Ratings (psi)
1/2 psi
Pressure Ratings (kPa)
3.5 kPa
Inlet/Outlet Size (in.)
1/2 in. x 1/2 in.
Pilot Gas Outlet
Compression fitting for 1/4 in. OD tubing
Pressure Tapping
1/8 in. NPT with plug
Approvals, American Gas Association
AGA Design Certificate: L2025006
Type of Fuel
Capacity (kBtuh)
At 1 in. wc p.d.-- 150,000 BTUh: 20,000 BTUh minimum
Approvals, Australian Gas Association
Australian Gas Assoc. Design Certificate: 4214; Approved for Delta C Applications
Pressure Regulator Setpoint (in. wc)
3.5 in. wc
Pressure Regulator Setpoint (kPa)
0.87 kPa
Ignition Type
Intermittent Pilot
Anticipator Setting
0.5 A