Product Description
WILL BE REPLACED WITH DIRECT UPGRADE A421Replaced with Johnson A421ABG-02C
WILL BE REPLACED WITH DIRECT UPGRADE A421 Johnson Controls A419ABG-3C Pre Wired Temp Controller For Kegerators and Brewing A419 Manual
This unit comes pre-wired with a 6' plug and 6' receptacle.
IMPORTANT: Use this A419ABG-3C Electronic Temperature Control only as an operating control.Where failure or malfunction of the A419ABG-3C Electronic Temperature Control could lead to personal injury or property damage to the controlled equipment or other property, additional precautions must be designed into the system. Incorporate and maintain other devices such as supervisory or alarm systems or safety or limit controls intended to warn of, or protect against, failure or malfunction of the A419ABG-3C Electronic Temperature Control. The A419ABG-3C Electronic Temperature Control is a single-stage, electronic temperature control. Pre-wired cords with plug and receptacle ends are provided for quick and simple installation.
Features
The Johnson Controls A419ABG-3C features a lockable, three-button touchpad for setup and adjustment and a Liquid Crystal Display (LCD) which displays the sensed temperature and other control functions. A front panel Light-Emitting Diode (LED) indicates the output relay status. The control has a setpoint range of -30 to 212°F (-34 to 100°C) and is available in 120 VAC models. The A419ABG-3C control has heating and cooling modes with adjustable setpoint and differential, an adjustable anti-short cycle delay, and a temperature offset (setback) function. The control provides remote sensing capability, and electronic accuracy in a Type NEMA 1 high-impact plastic enclosure suitable for surface or DIN rail mounting. The temperature sensor supplied with the control is interchangeable with compatible Johnson Controls/PENN® A99 temperature sensors. Pre-wired cords with plug and receptacle ends are provided for quick and simple installation. Each A419ABG-3C control includes a Johnson Controls/PENN A99 temperature sensor. The sensor may be removed and replaced with any compatible Johnson Controls® A99 temperature sensor, or the wire leads on the sensor may be extended.
Product Specifications
Setpoint Range | -30 to 212°F (-34 to 100°C) |
Differential Range | 1 to 30F° (1 to 30C°) |
Supply Voltage | 120 VAC, 60 Hz |
Power Consumption | 1.8 VA Maximum |
SPST Output Relay Full Load Amperes N.O. | 12 A |
Contacts Electrical Locked Rotor Amperes N.O. | 72 A |
Ratings Non-inductive Amperes N.O. | 10 A |
Pilot Duty | 125 VA @ 120 VAC |
Sensor Type | PTC Sensor with 6.6 ft (2.0 m) leads |
Control Ambient Temperature Operating | -30 to 140°F (-34 to 60°C) |
Control Ambient Temperature Shipping | -40 to 185°F (-40 to 85°C) |
Ambient Humidity | 0 to 95% RH Noncondensing; Maximum Dew Point: 85°F (29°C) |
Control Enclosure Material Case and Cover | NEMA 1 - High-Impact Thermoplastic |
Agency Listings | UL: File E27734; CCN�s XAPX (US), XAPX7 (Canada) FCC: CFR 47, Part 15, Class A. DOC, Class A |