Product Description
Honeywell V4295S1013 1 in. NPT Solenoid, N.O. Vent ValveOverview
V4295A/V8295A normally closed and V4295S/V8295S normally open (vent) solenoid gas valves, are suitable for furnaces, ovens, atmospheric burners, commercial water heaters, roof-top make-up air units, power burners, and commercial/industrial boilers.
Â
Feature
- V8295A,S are used with 24 Vac controllers.
- V4295A,S are used with 120 Vac controllers.
- Positive close off of gas flow when de-energized.
- High valve spring force allows up to 0.7 psi back pressure at valve seat.
- No inlet pressure influence at valve seat.
- Inlet pressure changes do not affect ability to close valve.
- Low operating noise.
- Low rush-in current.
- Upstream and downstream taps allows tapping and testing pressure points
Product Specifications | |
Dimensions (in.) | 5 1/2 in. high x 3 15/16 in. wide x 3 in. deep |
Dimensions (mm) | 140 mm high x 100 mm wide x 76 mm deep |
Materials | Body--Die-cast aluminum |
Mounting | Vertical to 90 degrees from vertical |
Frequency | 50 Hz; 60 Hz |
Approvals, Underwriters Laboratories Inc. | Listed: File No. MH18476, V1, S1 - Guide No. YIOZ |
Approvals, Canadian Standards Association | Certificate No. 158158-1154280, Guide No. C3371-03, 83 |
Electrical Connections | Screw terminals |
Voltage | 120 Vac |
Operating Temperature Range (F) | -40 F to +140 F |
Operating Temperature Range (C) | -40 C to +60 C |
Approvals, Control Safety Devices | Acceptable |
Approvals, Swiss RE | Acceptable |
Approvals, Factory Mutual | Approved: Report No. J.I.OD6A2.AF |
Current Ratings | 0.16 max amps at rated Vac/Hz |
Body Pattern | Straight-through, non-offset |
Pressure Ratings (psi) | 2 psi |
Pressure Ratings (kPa) | 13.8 kPa |
Capacity (m³/hr) | 11.9 m3/hr |
Pressure Tapping | Inlet and outlet pressure taps-- 1/4 in. NPT |
Type of Fuel | Air; natural; manufactured; mixed; LP |
Pipe Size (inch) | 1 in. |
Pipe Size (DN) | DN25 |
Capacity (cfh) | 420 cfh |
Valve Opening Time | less than 1 sec |
Valve Closing Time | less than 1 sec |