Product Description
Honeywell M9185A1018 60 lb-in, Spring Return Actuator, Proportioning control, 24VOverview
Series 90 Modutrolâ„¢ IV Motors non-spring return modulating proportional control motors used with controllers that provide a Series 90 output to operate dampers or valves.
Features
- Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position.
- Integral spring return in the event of power failure.
- Motor and circuitry operate from 24 Vac.
- Quick-connect terminals are standard; screw terminal adapter is available.
- Adapter bracket for matching shaft height of older motors is available.
- Motors have field adjustable stroke (90 to 160 degrees).
- Integral auxiliary switches are available factory mounted, or can be field added.
- Spring return motors can operate valve linkages from power end or normally open valve applications.
- All models have dual shafts (slotted and tapped on both ends).
- All models have auxiliary switch cams.
- Fixed torque throughout the entire voltage range.
Product Specifications | |
Application | Electric |
Dimensions (in.) | 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in. deep |
Dimensions (mm) | 164 mm high x 140 mm wide x 222 mm deep |
Weight (lb) | 8.5 lb |
Mounting | Foot-mounted |
Frequency | 50 Hz; 60 Hz |
Approvals, Underwriters Laboratories Inc. | Listed: File No. E4436, Guide No. XAPX for USA and Canada |
Electrical Connections | Quick-connect terminals |
Supply Voltage | 24V |
Power Consumption | Driving-- 20 VA |
Approvals, CE | EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD) |
Ambient Temperature Range (F) | -40 F to +150 F |
Ambient Temperature Range (C) | -40 C to +60 C |
Internal Auxiliary Switch | 0 |
Auxiliary Switch Ratings | AFL - 120 Vac-- 7.2A; ALR- 120 Vac-- 43.2A; AFL - 240 Vac-- 3.6A; ALR- 240 Vac-- 21.6A |
Stroke | Adjustable; 90 to 160 degrees, Asymmetrical |
Shaft Dimensions (in.) | 0.375 in. Square |
Control Signal | Proportional, 135 ohm |
Fail Safe Mode | Spring Return |
Torque Rating (lb-in.) | 60 lb-in. |
Torque Rating (Nm) | 6.8 Nm |
External Auxiliary Switches Available | Yes |
Shaft Rotation (upon control signal increase) | Clockwise (as viewed from power end) (normally closed) |
Factory Stroke Setting | 160 degrees |
Timing, Nominal | 30-60 sec |
Feedback | No |
Shaft Dimensions (mm) | 10 mm Square |
Motor shafts | Dual-ended shaft |
Deadweight Load on Shaft | Either End-- 200 lbs.; Combined on both Shafts-- 300 lbs. |
Internal Transformer | None |