The Remote Indoor Temperature Sensor is used to sense temperature remotely.Used to sense temperature if the thermostat is installed in a poor temperature sensing location.Small remote temperature sensor to match any room decor.Easy to install and use.Factory calibrated; no field calibration required.Works with a maximum 200 foot wire run.
Product Specifications
Application
Remote Indoor Temperature Sensor for VisionPRO and VisionPRO IAQ Thermostats
Dimensions (in.)
1 1/2 in. wide x 2 1/4 in. high x 3/4 in. deep
Dimensions (mm)
38 mm wide x 57 mm high x 19 mm deep
Used With
VisionPRO® and VisionPRO® IAQ Series Thermostats
Mounting
Mounts directly on the wall using mounting screws and anchors provided